The Traffic Shaping of gateProtect is one of the most extensive implementations at the market. For each object on the desktop maximum and minimum bandwidth can be specified. Thereupon constructing the traffic for the individual services can be affected. Thus the distribution of the bandwidth can be configured into each degree of detail.
A further characteristic of the gateProtect solution is the prioritisation of data packets in the VPN tunnel using QoS. This is important for time-critical applications, where a delay is unwanted. So you are able to telephone trouble-free over a VPN tunnel by using VoIP independently of the efficiency of the tunnel e.g. by RDP or downloads.

With its load balancing gateProtect allows to divide the data traffic to the Internet on different internet connections. The firewall takes the decision which internet connection will be used for every connection.

Such segmentation is normally made according to protocols. gateProtect allows to allocate the traffic to several internet connection. In this way the usage of the internet connections detail can be planned and optimized into smallest detail.

The high availability of gateProtect firewall systems is based on an active/passive system. In this configuration a secondary firewall is installed parallel to the primary firewall. The secondary firewall continual synchronizes over dedicated connections with the primary Firewall. So it is able to assume the work of the primary Firewall in case of failures smoothly and without manual interference.

Furthermore the condition of the primary firewall is monitored by different systems. If the monitoring detects any problems within the firewall, the firewall will shutdown by itself. After this the secondary firewall gives free the synchronized configuration and will continue working directly in place of the primary firewall. The down-times will minimize and the occurred problems can be eliminated unhurriedly.